1. Injection pressure of plastic injection molding parametersThe injection pressure is provided by the hydraulic system of the injection molding system. The pressure of the hydraulic cylinder is trans...
Electrostatic charges can cause problems when molten plastic parisons fall toward an open mold, for example, when there is more than one parison per blow mould, the static charge is always of the same...
Ⅰ. Injection molding temperature control1. Cylinder temperatureThe temperature that needs to be controlled in the injection molding process includes barrel temperature, nozzle temperature and mold te...
Insert molding refers to the molding method in which the mold is filled with pre-prepared inserts of different materials, then injected with resin, and the molten material is bonded and solidified wit...
Blow molding mold is a combination plastic mold used for compression molding, extrusion molding, injection molding, plastic blow molding, and low foaming molding. Blow molding mold consists of concave...
From roll mills and batch mixers to single-screw and twin-screw extruders, people use various types of molten mixing equipment. Continuous mixing equipment (extruders) is the most commonly used equipm...
English
français
Deutsch
Español
italiano
русский
português
العربية
Türkçe